Cozy home
Knit Tissue Box Cover
New design · not printed yet
A cozy stockinette-knit cover for tissue boxes up to 230 × 120 × 84 mm: drop the box in, slide the bottom shut, and pull tissues through the top slot. Every stitch is real 3D relief, wrapping around the rounded corners.
- Width: 242.8 mm
- Depth: 132.7 mm
- Height: 91.8 mm
- 2 parts to print
To see it on your desk in AR, open this page in Safari
Take it apart
2 parts, one tidy assembly
Drag the slider to see how every printed part fits together.
- Knit Cover × 1
- Sliding Bottom × 1
Colourways
Pick your colours
Tap a swatch to see the model printed in another palette. Any PLA works — these are just a few combinations I like.
Original
A closer look
Every angle
Print it yourself
Settings & parts
Print settings
- Settings: Recommended
- Material: PLA
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Walls: 3
- Infill: 10% Gyroid
- Supports: None
- Orientation: Cover upside down
Parts
- Knit Cover × 1
- Sliding Bottom × 1
Print cost
What will it cost you?
About 417 g of PLA and 11.9 h of printing, estimated from the 3D model with the settings above. Type in the numbers from your slicer and your own prices.
Assembly
Step by step
Step 1 of 2
Set the cover over a tissue box, tissues up through the slot.
A printable assembly guide (PDF) comes with the model files.
Ready to print it?
A sweater-knit cover for tissue boxes, every stitch in real 3D relief.